CHQuilts: blades
Showing posts with label blades. Show all posts
Showing posts with label blades. Show all posts

Thursday, November 5, 2015

Quilting: always creative; always learning

Just when you think a project is simple, think again.

Donna's table topperMy friend Donna asked if I could re-create a simple table topper she had on her dining room table, at right. She liked it so much that she wanted one in Fall colors. 

I thought, easy-peasy. This is just a simple Dresden Plate pattern. It should be no trouble. Donna provided a sketch with some of the dimensions. The whole piece measured about 19 1/2 inches. 

I checked out my Dresden ruler and realized the smallest number of blades it contained was 16. That wouldn't work. Second option was to draft this pattern with Electric Quilt 7, the quilting software that has helped me out more than I can say. I am pretty new at working with this program, so I figured there might be a bit of a learning curve. That is OK. Learning new things never goes to waste. And, there is always something new to learn. It seems the more I get, the more I want. I think that is all part of the obsession.

First, I looked up Dresden Plate blocks in the block library. I found a 3-blade corner block. I figured I could copy the 3 blades and simply paste and rotate them to form a 9-blade block. I wasn't sure how to do that and figured there might be an easier way. Since I committed to this project, I wanted to get started on it, but I made myself a promise that in the future, I would work on using this software to modify existing designs.

I continued my search in the software's block library. I found a wheel block that was perfect. All it was missing were the points. I could draw those in once I printed out a template--no problem. 

fall fabricsNext I picked out three fabrics I thought would make a nice Fall piece. I sent the picture to Donna. She approved. 

I went back to the drafting stage. I printed out the finished "wheel" block with the points drawn in. 

Suddenly, I was horrified to realize the block only had eight blades rather than nine. So, I went back to the drawing board and redrew the pattern. I printed it out. I knew my improvisation wasn't perfect, but was a good place to start. The sizes weren't exact, so I decided to measure each blade at the base and take an average. The finished size would be my template for all nine blades.

I measured them all. I was surprised to find the nine blades ranged in size from 1 1/2 inches to more than 3 inches. Next I converted all the measurements to eighths, the smallest common denominator. Then I added them and divided by nine, the number of blades. That number measured 2 1/2 inches. I found one of the blades in my printout that measured 2 1/2 inches and made it my template. I also added 1/4 inch for the seam. 

I cut three blades from each fabric and sewed them together. I soon realized that the base measurement wasn't enough to know because once sewn together, the piece didn't lay flat. Next, I increased the seam allowance to 1/2 inch to take up some of the excess, cutting away the first seam to leave only a 1/4 inch seam. 

It was better, but still not right. The angle was off. I carefully measured the blades from the center point to the side at 3 1/2 inches, one of the measurements Donna had provided. So, I sewed each blade starting at that point, changing the angle slightly. 

It am getting pretty proficient at sewing with my fingers crossed. It worked. The piece laid flat and looked just like it was supposed to. 

I printed out a picture of the piece as a pencil sketch, and let it speak to me. Then, I quilted it.

Fall table topper
I checked You Tube videos to verify my own understanding of how to bind inside and outside angles. I finished the piece last night. This is how it turned out.

I actually like it, so I may make a template pattern from it and make one in Christmas colors.

I totally love little projects like this. They satisfy my need to create something and you just can't beat that instant gratification factor.